Mechanical Engineering publications :
1479
Collection home page

Subscribe to this collection to receive daily e-mail notification of new additions RSS Feed RSS Feed RSS Feed
Collection's Items (Sorted by Issue Date in Descending order): 1 to 20 of 1479
PreviewIssue DateTitleAuthor(s)
2017A baseline-free and non-contact method for detection and imaging of structural damage using 3D laser vibrometryAryan, P.; Kotousov, A.; Ng, C.; Cazzolato, B.
2017A model-based method for damage detection with guided wavesAryan, P.; Kotousov, A.; Ng, C.; Cazzolato, B.
2017Resonance responses of geometrically imperfect functionally graded extensible microbeamsGhayesh, M.; Farokhi, H.; Gholipour, A.; Hussain, S.; Arjomandi, M.
2017Mechanical and electrochemical properties of a sputter-deposited β-Ta₅Si₃ nanocrystalline coatingXu, J.; Cheng, J.; Jiang, S.; Munroe, P.; Xie, Z.
2017Research challenges in combustion and gasification arising from emerging technologies employing directly irradiated concentrating solar thermal radiationNathan, G.; Dally, B.; Alwahabi, Z.; van Eyk, P.; Jafarian, M.; Ashman, P.
2017A method for identifying and characterising particle clusters in a two-phase turbulent jetLau, T.; nathan, G.
2017Thermodynamic potential of high temperature chemical looping combustion with molten iron oxide as the oxygen carrierJafarian, S.; Arjomandi, M.; Nathan, G.
2017An artificial intelligence solution for heat flux estimation using temperature history; a two-input/two-output problemMirsepahi, A.; Chen, L.; O Neill, B.
2017Performance of an insect-inspired target tracker in natural conditionsBagheri, Z.; Wiederman, S.; Cazzolato, B.; Grainger, S.; O'Carroll, D.
2017New understanding of mode switching in the fluidic precessing jet flowChen, X.; Tian, Z.; Kelso, R.; Nathan, G.
2017The topology of a precessing flow within a suddenly expanding axisymmetric chamberChen, X.; Tian, Z.; Kelso, R.; Nathan, G.
2017Experimental and numerical investigation of the flow characteristics within a Solar Expanding-Vortex Particle Receiver-ReactorChinnici, A.; Xue, Y.; Lau, T.; Arjomandi, M.; Nathan, G.
2017Comparison of system performance in a hybrid solar receiver combustor operating with MILD and conventional combustion. Part I: Solar-only and combustion-only employing conventional combustionChinnici, A.; Tian, Z.; Lim, J.; Nathan, G.; Dally, B.
2017Effects of oxidant stream composition on non-premixed laminar flames with heated and diluted coflowsEvans, M.; Medwell, P.; Tian, Z.; Ye, J.; Frassoldati, A.; Cuoci, A.
2017Strain-rate effect upon the tensile behavior of CoCrFeNi high-entropy alloysHuo, W.; Zhou, H.; Fang, F.; Hu, X.; Xie, Z.; Jiang, J.
2017Simultaneous measurements of gas temperature, soot volume fraction and primary particle diameter in a sooting lifted turbulent ethylene/air non-premixed flameGu, D.; Sun, Z.; Dally, B.; Medwell, P.; Alwahabi, Z.; Nathan, G.
2017Optical thermometry for high temperature multiphase environments under high-flux irradiationGu, D.; Sun, Z.; Nathan, G.; Dong, X.; Dally, B.; Medwell, P.; Alwahabi, Z.
2017Nanoporosity improves the damage tolerance of nanostructured tantalum nitride coatingsXu, S.; Xu, J.; Munroe, P.; Xie, Z.
2017Performance effects of a single tubercle terminating at a swept wing’s tipBolzon, M.; Kelso, R.; Arjomandi, M.
2017Modelling complex cracks with finite elements: a kinematically enriched constitutive modelNguyen, V.; Nguyen, G.; Nguyen, C.; Shen, L.; Dias-da-Costa, D.; El-Zein, A.; Maggi, F.
Collection's Items (Sorted by Issue Date in Descending order): 1 to 20 of 1479