Adelaide Research & Scholarship: Browsing DSpace

Browsing "Mechanical Engineering publications" by Title

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:

Showing results 1027 to 1046 of 2024 < previous next >

Issue Date	Title	Author(s)
2018	Introduction of polymer-based nanocomposites	Hooshmand Zaferani, S.; Jawid, M.; Khan, M.M.
2010	Inverse control of a piezoelectric actuator for precise operation of a micro-motion stage	Minase, J.; Lu, T.; Cazzolato, B.; Grainger, S.; ACRA 2010
2013	Investigating the Effect of Organosilane and Cerium Nitrate on High- performance Epoxy-based Coatings for Carbon Steel	Hooshmand Zaferani, S.; Danaee, I.
2002	Investigation and modelling of the wall pressure field beneath a turbulent boundary layer at low and medium frequencies	Leclercq, D.; Bohineust, X.
2007	Investigation of a combustion driven oscillation in a refinery flare - Part B: Visualisation of a periodic flow instability in a bifurcating duct following a contraction	Riese, M.; Kelso, R.; Nathan, G.; Mullinger, P.
2012	Investigation of combustion enhancement by ozone additive in CH₄/air flames using direct laminar burning velocity measurements and kinetic simulations	Wang, Z.; Yang, L.; Li, B.; Li, Z.; Sun, Z.; Aldén, M.; Cen, K.; Konnov, A.
2019	Investigation of flash evaporation in solar water desalination systems	Ezzat, A.W.; Hu, E.; Jaber, S.
2016	Investigation of hydrogen assisted cracking in acicular ferrite using site-specific micro-fracture tests	Costin, W.; Lavigne, O.; Kotousov, A.; Ghomashchi, R.; Linton, V.
2008	Investigation of plasticity-induced fatigue crack closure	Codrington, J.; Kotousov, A.
2007	Investigation of plasticity-induced fatigue crack closure	Codrington, J.; Kotooussov, A.; Martin Veidt,; Australasian Congress on Applied Mechanics (5th : 2007 : Brisbane, Australia)
2013	Investigation of the bucket wheel reclaimer's cutting trajectory to define optimal voxel shape	Myo, T.; Lu, T.
2011	Investigation of the effect of dielectric barrier discharge plasma actuators on the radar cross section of an object	Wolf, S.; Arjomandi, M.
2013	Investigation of the flow structures in supersonic free and impinging jet flows	Chin, C.; Li, M.; Harkin, C.; Rochwerger, T.; Chan, L.; Ooi, A.; Risborg, A.; Soria, J.
1996	An Investigation of the Formation of Hollow Bead Defects in Pipeline Field Welds	Cantin, G. M. Delphine; Bee, J. V.
2022	Investigation of the influence of miniature vortex generators on the large-scale motions of a turbulent boundary layer	Chan, C.I.; Chin, R.C.
2000	An investigation of the interaction of a molten droplet with a liquid weld pool surface: a computational and experimental approach	Davies, M. H.; Wahab, Muhammad Abdul; Painter, M. J.
2010	Investigation of thermo-mechanical properties of slurry based thermal barrier coatings under repeated thermal shock	Nguyen, P.; Kotooussov, A.; Ho, S.; Wildy, S.; Aliabadi, M.H.; Abela, S.; Baragetti, S.; Guagliano, M.; Lee, H.S.
2007	Investigations of drop impact on dry walls with a lattice-Boltzmann model	Mukherjee, S.; Abraham, J.
2001	Is it possible to break-even in undergraduate engineering education? A cost analysis and costing model	Snyder, Scott D.
2015	Issues and challenges for pedestrian active safety systems based on real world accidents	Hamdane, H.; Serre, T.; Masson, C.; Anderson, R.

Showing results 1027 to 1046 of 2024 < previous next >