Please use this identifier to cite or link to this item:
https://hdl.handle.net/2440/70687
Citations | ||
Scopus | Web of Science® | Altmetric |
---|---|---|
?
|
?
|
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Pathmanathan, M. | - |
dc.contributor.author | Soong, W. | - |
dc.contributor.author | Ertugrul, N. | - |
dc.date.issued | 2011 | - |
dc.identifier.citation | Proceedings of the 2011 IEEE Energy Conversion Congress and Exposition (ECCE 2011), 17-22 September, 2011, Phoenix, Arizona, USA: pp.1676-1683 | - |
dc.identifier.isbn | 9781457705410 | - |
dc.identifier.issn | 2329-3721 | - |
dc.identifier.uri | http://hdl.handle.net/2440/70687 | - |
dc.description.abstract | Surface permanent magnet (PM) machines are normally operated by controlling the d-axis and q-axis currents. This paper examines the control of surface PM generators based on controlling the terminal voltage magnitude V and power-factor angle θ. This is well-suited for generator operation when using a switched-mode rectifier and avoids the need for a rotor position sensor. The parameters required for generating a given value of torque with minimum phase current in order to minimize copper losses are derived in this paper. This will be achieved by controlling V and θ to keep the d-axis current equal to zero at low speed, before switching to field-weakening control at higher speeds. Simulated and experimental results will be used to verify the control strategy, and the efficiency achieved. | - |
dc.description.statementofresponsibility | Mehanathan Pathmanathan, Wen Soong and Nesimi Ertugrul | - |
dc.language.iso | en | - |
dc.publisher | IEEE | - |
dc.relation.ispartofseries | IEEE Energy Conversion Congress and Exposition | - |
dc.rights | Copyright © 2011 by the Institute of Electrical and Electronic Engineers, Inc. All Rights Reserved | - |
dc.source.uri | http://dx.doi.org/10.1109/ecce.2011.6063984 | - |
dc.subject | AC-DC power conversion | - |
dc.subject | permanent magnetgenerators | - |
dc.subject | pulse-width modulated power converters | - |
dc.title | Maximum torque per ampere control of phase advance modulation of a SPM wind generator | - |
dc.type | Conference paper | - |
dc.contributor.conference | IEEE Energy Conversion Congress and Exposition (ECCE 2011) (2011 : Phoenix, AZ) | - |
dc.identifier.doi | 10.1109/ECCE.2011.6063984 | - |
dc.publisher.place | USA | - |
pubs.publication-status | Published | - |
dc.identifier.orcid | Soong, W. [0000-0003-0734-7608] | - |
dc.identifier.orcid | Ertugrul, N. [0000-0002-5592-5268] | - |
Appears in Collections: | Aurora harvest Electrical and Electronic Engineering publications Environment Institute publications |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.