Please use this identifier to cite or link to this item:
https://hdl.handle.net/2440/77897
Citations | ||
Scopus | Web of Science® | Altmetric |
---|---|---|
?
|
?
|
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Muraspachic, S. | - |
dc.contributor.author | Gu, P. | - |
dc.contributor.author | Farji, L. | - |
dc.contributor.author | Iskandarani, Y. | - |
dc.contributor.author | Shi, P. | - |
dc.contributor.author | Karimi, H. | - |
dc.date.issued | 2012 | - |
dc.identifier.citation | Central European Journal of Engineering, 2012; 2(2):201-211 | - |
dc.identifier.issn | 1896-1541 | - |
dc.identifier.issn | 2081-9927 | - |
dc.identifier.uri | http://hdl.handle.net/2440/77897 | - |
dc.description.abstract | <jats:title>Abstract</jats:title><jats:p>This paper presents the setup and running of a hardware-in-loop (HIL) simulation for an active heave compensated (AHC) draw-works. A simulation model of the draw-works is executed on a PC to simulate the AHC draw-works with a physical PLC. The PLC (ET200S) is configured with a controller architecture that regulates the motor angular displacement and velocity through actuation of the servo valves. Furthermore, a graphical user interface is developed for operation of the AHC system. The HIL test allowed tuning of the physical controller in terms of heave stabilization and positioning. The conclusion after the testing is a PLC which is ready for operation without necessitating the use a physical prototype of the process.</jats:p> | - |
dc.description.statementofresponsibility | Sanin Muraspahic, Peter Gu, Lawk Farji, Yousef Iskandarani, Peng Shi, Hamid Reza Karimi | - |
dc.language.iso | en | - |
dc.publisher | Versita | - |
dc.rights | © Versita sp. z o.o. | - |
dc.source.uri | http://dx.doi.org/10.2478/s13531-011-0062-1 | - |
dc.subject | Active heave compensation (AHC) | - |
dc.subject | Draw-works | - |
dc.subject | Hardware-in-the-loop (HIL) | - |
dc.subject | Hoisting rig | - |
dc.subject | Programmable logic controller (PLC) | - |
dc.title | Hardware-in-the-loop implementation for an active heave compensated drawworks | - |
dc.type | Journal article | - |
dc.identifier.doi | 10.2478/s13531-011-0062-1 | - |
pubs.publication-status | Published | - |
dc.identifier.orcid | Shi, P. [0000-0001-8218-586X] | - |
Appears in Collections: | Aurora harvest Electrical and Electronic Engineering publications |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.