Materials Research Group publications :
222
Collection home page

Subscribe to this collection to receive daily e-mail notification of new additions RSS Feed RSS Feed RSS Feed
Collection's Items (Sorted by Issue Date in Descending order): 1 to 20 of 222
PreviewIssue DateTitleAuthor(s)
2013Characterizing water sorption in 100% solids epoxy coatingsConiglio, N.; Nguyen, K.; Kurji, R.; Gamboa, E.
2013Hydrothermal ageing of X65 steel specimens coated with 100% solids epoxyGamboa, E.; Coniglio, N.; Kurji, R.; Callar, G.
2013Extremely hard, damage-tolerant ceramic coatings with functionally graded, periodically varying architectureWo, P.; Zhao, X.; Munroe, P.; Zhou, Z.F.; Li, K.; Habibi, D.; Xie, Z.
2013Architectural design of diamond-like carbon coatings for long-lasting joint replacementsLiu, Y.; Zhao, X.; Zhang, L.; Habibi, D.; Xie, Z.
2012On the non singular higher order terms in bi-dimensional and three-dimensional engineering applicationsBerto, F.; Lazzarin, P.; Kotooussov, A.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012Steady flow towards a row of collinear hydraulic fracturesKhanna, A.; Kotooussov, A.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012Bending strain measurements utilising a scanning laser Doppler vibrometerWildy, S.; Kotooussov, A.; Cazzolato, B.; Codrington, J.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012The economics of applying internal coatings to pump casingsWong, A.; Vince, P.; Gamboa, E.; Annual Conference of the Australasian Corrosion Association (2012 : Melbourne, Victoria)
2012A realistic assessment of recoverable thermal energy from Australian geothermal reservoirs: a simulation studyDoonechaly, N.; Rahman, S.; Kotooussov, A.; Australian Geothermal Energy Conference (5th : 2012 : Sydney, Australia)
2012On the residual opening of cracks with rough faces stimulted by shear slipBortolan Neto, L.; Kotooussov, A.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012Surface Strain Measurements Using a 3D Scanning Laser VibrometerWeisbecker, H.; Cazzolato, B.; Wildy, S.; Marburg, S.; Codrington, J.; Kotooussov, A.
2012Induced out-of-plane mode at the tip of blunt lateral notches and holes under in-plane shear loadingBerto, F.; Lazzarin, P.; Kotooussov, A.; Pook, L.
2012Factors governing the mechanical behaviour of CrSiN coatings: Combinednanoindentation testing and transmission electron microscopyWo, P.; Munroe, P.; Li, Z.; Jiang, Z.T.; Xie, Z.; Zhou, Z.F.; Li, K.
2012Conductivity of narrow fractures filled with a proppant monolayerKhanna, A.; Kotooussov, A.; Sobey, J.; Weller, P.
2012Mechanical characterization of a novel nanocrystalline coating: first-principles calculations and nanoindentationLai, D.; Xu, J.; Xie, Z.; Habibi, D.; Munroe, P.
2012Investigation on effect of alloying elements on mechanical properties of MoSi₂ by first principle calculationXu, J.; Wu, J.; Lai, D.; Xie, Z.; Munroe, P.
2012In situ synthesis and characterization of a hierarchically structured Al₂0₃/Al₃Ti compositeZhu, H.; Jiang, Y.; Song, J.; Li, J.; Munroe, P.; Xie, Z.
2012Optical and mechanical characterization of novel cobalt-based metal oxide thin films synthesized using sol-gel dip-coating methodAmri, A.; Jiang, Z.T.; Pryor, T.; Yin, C.Y.; Xie, Z.; Mondinos, N.
2012Effect of a variation in material properties on the crack tip opening displacementCodrington, J.; Kotooussov, A.; Chang, D.
2012Designing superhard, self-toughening CrAlN coatings through grain boundary engineeringLi, Z.; Munroe, P.; Jiang, Z.T.; Zhao, X.; Xu, J.; Zhou, Z.F.; Jiang, J.Q.; Fang, F.; Xie, Z.
Collection's Items (Sorted by Issue Date in Descending order): 1 to 20 of 222